Search for: All records

Zwitterionic polymers have proven to be a promising non-fouling material that can be applied in the design of selective layers of thin film composite (TFC) membranes. Extending the permeability and usage of TFC membranes have attracted increasing interest in membrane-based desalination processes since water-flux reduction associated with biofouling persist nowadays as a common challenge. By virtue of its strong hydration, this polymer category is very useful to counteract biofouling in marine and biomedical systems, but the benefits from their application in membrane technology are still emerging. The efficacy of the non-fouling property as a function of the polymer’s molecular weight remains unknown. In pursuit of that vision, this study fosters new scientific insights via probing different molecular weights of poly(carboxybetain methacrylate) (PCBMA) coated on the surface as a selective layer for the prepared TFC membranes. The coated zwitterionic membranes (zM) exhibited excellent performance to prevent water flux decay in a bench scale forward osmosis system. The prepared zM membranes revealed enhanced hydrophilic properties and retained its operational water-flux when compared to the control. Our results suggest that using an intermediate size molecular weight (PCBMA Mn 50,000) will result in the best operational performance. The intermediate size resulted in the lowest flux decline rate (Rt) of 0.01±0.001 (zM-50) when compared to the unmodified control membrane 0.56 ± 0.071 (M0) after using a model BSA foulant solution. Furthermore, all coated membranes exhibited similar trends in the observed reverse salt flux profiles as well. The constructed zM membranes will serve as a model to develop further selective layers in the construction of TFC membranes. 

In the last decades, cell-based approaches for bone tissue engineering (BTE) have relied on using models that cannot replicate the complexity of the bone microenvironment. There is an ongoing amount of research on scaffold development responding to the need for feasible materials that can mimic the bone extracellular matrix (ECM) and aid bone tissue regeneration (BTR). In this work, a porous cellulose acetate (CA) fiber mat was developed using the electrospinning technique and the mats were chemically modified to bioactivate their surface and promote osteoconduction and osteoinduction. The mats were characterized using FTIR and SEM/EDS to validate the chemical modifications and assess their structural integrity. By coupling adhesive peptides KRSR, RGD, and growth factor BMP-2, the fiber mats were bioactivated, and their induced biological responses were evaluated by employing immunocytochemical (ICC) techniques to study the adhesion, proliferation, and differentiation of premature osteoblast cells (hFOB 1.19). The biological assessment revealed that at short culturing periods of 48 hours and 7 days, the presence of the peptides was significant for proliferation and adhesion, whereas at longer culture times of 14 days, it had no significant effect on differentiation and maturation of the osteogenic progenitor cells. Based on the obtained results, it is thus concluded that the CA porous fiber mats provide a promising surface morphology that is both biocompatible and can be rendered bioactive upon the addition of osteogenic peptides to favor osteoconduction leading to new tissue formation. 

The prevalence of emerging organic contaminants (EOCs) in ground and surface water has sparked the search for more effective methods to remove EOCs from the environment. In pursuit of a solution for this environmental concern, herein we present the development of reusable films based on cellulose nanofibers (CNFs) and the block copolymer, poly(4-vinylpyridine-b-ethylene oxide) (P4VP-PEO) to adsorb sulfamethoxazole (SMX) as an EOC model compound. We hypothesize that the adsorption of SMX was achieved mainly by π-π interactions between the pyridine functionalities of the block copolymer and the electron deficient phenyl group of the SMX. Preceding preparation of the films, CNFs were modified with the alkoxysilane trimethoxy(2-phenylethyl)silane (TMPES) to increase their stability in aqueous solution. After the addition of P4VP-PEO, the process was completed by filtration followed by oven-drying. XPS and FTIR were employed to confirm the addition of TMPES and P4VP-PEO, respectively. Adsorption batch experiments were performed in aqueous solutions of SMX at a neutral pH, obtaining adsorptions of up to 0.014 mmol/g in a moderate time of 60 min. For the reusability tests, films were immersed in ethanol 95 wt.% to elude the adsorbed SMX, rinsed with deionized (DI) water, and dried at room temperature to be reused in a new adsorption cycle. We found that this new composite material could be reused several times with negligible loss of adsorption capacity. The films presented have been shown to be of substantial importance for water remediation as they find direct application in the adsorption of electron deficient aromatic compounds and are reusable.